Shopping Cart
ItemQtyPrice

Sub Total: £0.00
Delivery: £0.00
Total: £0.00

Wishing every one a very Happy New Year

www.modeltrainsuk.co.uk 
Model Railway Accessory Suppliers  -  24 YEARS INTERNET TRADING - Telephone  01588 660 425  (11am - 5pm)        
  1.      30% OFF ALL ITEMS ***

CO85 BOB Cl. FIGHTER PILOT LOCO DAPOL OO GAUGE MODEL RAILWAY PLASTIC TRAIN KIT - C085   - (PLASTIC WHEELS)  MODEL ONLY
The picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.

***↓↓↓  FINAL  RETIREMENT CLOSING DOWN  SALE  ↓↓↓*** 
 
ALL  LISTED ITEMS HAVE BEEN REDUCED FROM THE RRP THEN 
  RECEIVE THE  30% DISCOUNT OFF YOUR ORDER TOTAL   
NEW CUSTOMERS - NO NEED TO LOG IN
 
↓↓↓
   

PAGE DOWN TO OUR WEB SHOP


Your Account
Forgotten your password?































































       



   Home / Top
        
 
  >

  POWER SUPPLY REQUIRED 12V DC


TRAINTRONICS Colour-Light Signals are designed to run from 12VDC.
They may be controlled by the Traintronics range of colour-light signal switches, from your own switches or controller, or from a DCC Accessory Decoder.
 
 
Having located a suitable position for the signal, drill a 1/8 inch (3.2mm) diameter hole through the baseboard, making
sure the drill is perfectly upright.
From above, carefully feed the lead wires of the signal through the hole in the baseboard, see figure 1. Insert the signal
post into the hole and push it gently in until the base makes contact with the baseboard, taking care not to snag the
lead wires.
Using polystyrene cement, attach the hoop, ladder and Identification Plate, see figure 2. Additional signs are included
for the telephone and ‘Track Circuit’ diamond plate.
The signal is equipped with thin connecting leads, and an adaptor PCB is provided to enable normal wires to be
connected to the signal. Apart from making it easy to connect the wires, the adaptor PCB also matches the brightness
of the lamps and gives a fading effect which mimics the real signals.
Position the adaptor PCB under the baseboard near the signal, so that the lead wires from the signal will easily reach
the adaptor PCB, see figure 3.
Mark through the two adaptor PCB fixing holes into the baseboard. Using a drill or bradawl make two small holes to
accommodate the fixing screws.
Fit the adaptor PCB to the underside of the baseboard using the supplied screws, ensuring that the twospacer rings
are positioned between the adaptor PCB and the baseboard.
 
FITTING TO BASEBOARD
Connect the wires from the signal to the ‘To Signal’ terminal block on the PCB. Refer to figure 4 and the markings on
the PCB and check that the right colour wires are in the correct positions. Using a small screwdriver, open the terminals
and insert the wires. Make sure the wires are firmly gripped when the terminal has been tightened.
Connect the wires from your signal controller or switch to the ‘From Supply’ terminal block.
The signal controller should produce +12V on the corresponding output to illuminate the light. The negatives of the
lights are all joined together to -.
The Traintronics signal switch range provides a convenient way of operating Traintronics colourlight signals.
TRAINTRONICS Colour-Light Signals are designed to run from 12VDC. They may be controlled by the Traintronics
range of colour-light signal switches, from your own switches or controller, or from a DCC Accessory Decoder.
 
CONNECTION INFORMATION
Operate the signal using your switch or controller, and check each aspect lights in the correct order. On double yellow
signals the yellow wires may need to be swapped over. If one or more aspects do not light, double-check the
connections. The signal lead wires are very thin and you may need to reposition them in the terminal block. Also
check the polarity of your supply. The signals themselves are protected against most kinds of wiring faults so they
should work once any problems have been corrected.
Secure all wiring neatly under the baseboard so that it will not get snagged or damaged.
 
TESTING
Operate the signal using your switch or controller, and check each aspect lights in the correct order. On double yellow
signals the yellow wires may need to be swapped over. If one or more aspects do not light, double-check the
connections. The signal lead wires are very thin and you may need to reposition them in the terminal block. Also
check the polarity of your supply. The signals themselves are protected against most kinds of wiring faults so they
should work once any problems have been corrected.
Secure all wiring neatly under the baseboard so that it will not get snagged or damaged.
Traintronics,
 

Functions include: Built-in Circuit Protection, Fading in - Fading out adjustment, Plug & Play interface circuit board, LED’s for low power consumption and reliability.

No Soldering required. Circuit board supplied with screw in terminals.

Included: Signal identification numbers/lettering, ladder, and ladder safety ring. Need to be fitted to signal.

The signal is equipped with thin connecting leads, and an adaptor PCB is provided to enable normal wires to be
connected to the signal. Apart from making it easy to connect the wires, the adaptor PCB also matches the brightness
of the lamps and gives a fading effect which mimics the real signals.

IF AN ITEM IS NOT SHOWN BELOW IT IS NO LONGER AVAILABLE
PLEASE ONLY ORDER ITEMS THAT ARE LISTED AS BEING IN STOCK
 

TRAINTRONICS 103 - 2 ASPECT COLOUR LIGHT SIGNAL Y/G - Signals from MODELTRAINSUKTRAINTRONICS 103 - 2 ASPECT COLOUR LIGHT SIGNAL Y/G - Signals from MODELTRAINSUK
£13.78
TRAINTRONICS 105 - 3 ASPECT COLOUR LIGHT SIGNAL Y/G/Y - Signals from MODELTRAINSUKTRAINTRONICS 105 - 3 ASPECT COLOUR LIGHT SIGNAL Y/G/Y - Signals from MODELTRAINSUK
£15.68
TRAINTRONICS 110 - 2 ASPECT COLOUR LIGHT SIGNAL - Signals from MODELTRAINSUKTRAINTRONICS 110 - 2 ASPECT COLOUR LIGHT SIGNAL - Signals from MODELTRAINSUK
£23.74
TRAINTRONICS TT112 - 3 ASPECT COLOUR LIGHT SIGNAL L/H Feather - Signals from MODELTRAINSUKTRAINTRONICS TT112 - 3 ASPECT COLOUR LIGHT SIGNAL L/H Feather - Signals from MODELTRAINSUK
£25.64
TRAINTRONICS TT115 - 4 ASPECT COLOUR LIGHT SIGNAL R/H Feather - Signals from MODELTRAINSUKTRAINTRONICS TT115 - 4 ASPECT COLOUR LIGHT SIGNAL R/H Feather - Signals from MODELTRAINSUK
£27.54
TRAINTRONICS TT150 - 2 ASPECT COLOUR LIGHT SIGNAL HEAD only - Signals from MODELTRAINSUKTRAINTRONICS TT150 - 2 ASPECT COLOUR LIGHT SIGNAL HEAD only - Signals from MODELTRAINSUK
£12.34
TRAINTRONICS TT151 - 3 ASPECT COLOUR LIGHT SIGNAL HEAD only - Signals from MODELTRAINSUKTRAINTRONICS TT151 - 3 ASPECT COLOUR LIGHT SIGNAL HEAD only - Signals from MODELTRAINSUK
£14.24
TRAINTRONICS TT155 - 3 ASPECT COLOUR LIGHT SIGNAL HEAD LH FEATHER only - Signals from MODELTRAINSUKTRAINTRONICS TT155 - 3 ASPECT COLOUR LIGHT SIGNAL HEAD LH FEATHER only - Signals from MODELTRAINSUK
£25.64
TRAINTRONICS TT302 TRAIN DETECTION, AUTOMATIC CONTROL AND SIGNALLING CRAVENMODELS - MODELTRAINSUKTRAINTRONICS TT302 TRAIN DETECTION, AUTOMATIC CONTROL AND SIGNALLING CRAVENMODELS - MODELTRAINSUK
£10.40